Step 3
Plug the blue sensor cable into your Verv hub.
Please ensure the cable is
securely plugged into the port
Step 4
Plug the power cable into the clover leaf socket on your
Verv hub. Connect your Verv hub to the mains power.
Only use the power cable provided
in the box and ensure it's securely
plugged in to your Verv hub
Step 5
When your hub lights start flashing green, Verv is
ready! For any issues, please visit the troubleshooting
page or feel free to contact us
Turn on the power switch on your Verv hub.
It can take a few minutes for your Verv to start up.
Step 6
Feedback
Troubleshooting & Support
Download the app at
www.verv.energy/install
If you’re having trouble setting up your Verv hub,
you can get support here:
Our troubleshooting page on our website:
www.verv.energy/help
Start a live chat on
www.verv.energy
Send an email to
Call free on
0800 772 0160
Verv, St Magnus House, 3 Lower Thames Street, London EC3R 6HD
If you're satisfied with your setup process, please write a review about
your experience.
If there are things we could do better, please contact us and we'll be
happy to solve any issues you may be having.
Technical Specifications
Technical specifications
In accordance with EN 61326-1:2013
This equipment is for indoor use only
Protection against electric shock: Independently Mounted Class I Equipment
Rated voltage: 216-264 V AC, 50-60 Hz
Rated power: 1 A max
Method of earthing: Functional ground terminal
Surge immunity category: Installation Class 2 or Residential
Pollution degree: 2
Rated impulse voltage: 2500 V
Operating temperature: 5 °C to 40 °C
Relative humidity: 80% to 31 °C, 50% at 40 °C
Max altitude: 2000 metres
Approved accessories: supplied sensor (current clamp) & mains power cable
Size: 121 mm (w) x 116 mm (d) x 41 mm (h)
Weight: 350g
Part Number: ABCB03
Model: Verv Home Energy Assistant
Dispose in accordance with applicable legislation. The WEEE symbol means
that your Verv must be disposed of separately from general household
waste. When Verv reaches its end of life, take it to a designated waste
collection point in your area for safe disposal or recycling. By doing this, you’ll
conserve natural resources, protect human health and help the environment.
Green Running Limited hereby declares this Verv Home Energy Assistant is in
compliance with the essential requirements and other relevant provisions of EMC
Directives 2014/53/EU and 2011/65/EU. A copy of the EU Declaration of Conformity
is available by request. This equipment may be operated in: GB, IE, FR, NL, BE, IT.
Operation is intended to be wireless using its internal WiFi antenna. Operation using
ethernet cable may affect the RF conformance of the Radio Equipment Directive.
EU declaration of conformity
Version 1.2
Safety Information
In accordance with EN 61010-1:2010
Safety Symbols
Warning: Read instructions to understand possible hazard
Danger: Electrical shock hazard
We assume no liability for any injury caused whatsoever in connection with the
installation. Verv installation is based on a safety compliant electricity meter.
If you are unsure, please consult a qualified electrician.
Use only as specified by the operating instructions or the equipment’s intrinsic
protection may be impaired.
Safety Warnings
• Always observe the following safety precautions
• Only connect to an earthed supply socket.
THIS UNIT IS CLASS 1 CONSTRUCTION AND MUST BE EARTHED!
• Connect only to a power source with a voltage corresponding to that on the rating plate.
• Always use the mains lead supplied. Your sales outlet can provide a lead
suitable for your country.
• Ensure that the mains switch is easily accessible to allow the unit to be switched off.
• Do not install Verv such that it is only supported by its interconnection cables.
Installation
• Ensure that Verv is placed on a solid, level surface which is able to support its weight.
• Ensure all cables are routed safely to avoid tripping: also to avoid sharp bends and pinches.
• Ensure that only specified cables are used for interconnection of equipment
Maintenance
• This equipment contains no user-serviceable parts. Refer all repairs to
qualified service personnel. Opening the product voids the warranty.
• Clean only with a dry soft cloth. Do not wetten or allow moisture to penetrate
the unit. Do not use solvents.
