Apolix
Electronic and automatic polymerizer
Rev. 10/2019
Instruction for use
a.gree srl
Via Retrone 14, Altavilla Vicentina 36077 (VI) Italy
+39 0444 960 991 [email protected]
7/7
vertysystem.com
LEGEND
TEMPERATURE (45°C)
SINGLE BEEP
POLYMERIZATION
DOUBLE BEEP
END OF THE CYCLE
AUTOMATIC AIR
DISCHARGE COMPLETED
LEGEND
TEMPERATURE (85°C)
SINGLE BEEP
POLYMERIZATION
DOUBLE BEEP
END OF THE CYCLE
AUTOMATIC AIR
DISCHARGE COMPLETED
DURATION
45 min.
15 min.
TOT.
60 min.
DURATION
20 min.
10 min.
TOT.
30 min.
P.1 | VERTYS PROTHESIS HOT
P.2 | VERTYS TEMPLUS
Ideal programme for heat curing full
denture resins, charged with composite
micro-pearls. For a very high quality
polymerization set the pressure to 2 Bar
and fill the chamber with at least 3/4 of
water.
Ideal programme for cold curing
temporary resins charged with
composite micro-pearls. For a very
high quality polymerization set the
pressure to 2 Bar and fill the chamber
with at least 3/4 of water.
LEGEND
TEMPERATURE (38°C)
SINGLE BEEP
POLYMERIZATION
DOUBLE BEEP
END OF THE CYCLE
AUTOMATIC AIR
DISCHARGE COMPLETED
DURATION
30 min.
10 min.
TOT.
40 min.
P.3 | VERTYS SURGICAL
Ideale programme for bite splints and
surgical/radiological stents. For a very
high quality polymerization set the
pressure to 2 Bar and fill the chamber
with at least 3/4 of water.
