Vertu Ascent Ti-C RM-467V, Руководство пользователя

Страница: 7 / 38

6 English
Inserting the battery and SIM card
The SIM card and its contacts are easily damaged.
Be careful when handling, inserting or removing the SIM card.
R e m o v i n g t h e b a c k c o v e r
I n s e r t i n g t h e S I M c a rd
I n s e r t i n g t h e b a t t e r y
R e p l a c i n g t h e b a ck c o v e r
Keep SIM cards and the back cover release key out of the
reach of small children.
Always switch the phone off and disconnect the charger
before removing the battery.
With the back of your Vertu
phone facing you, position the
back cover release key (
01 ) into
the slot of the locking screw
(
02 ).
Turn the locking screw ( 02 ) a
quarter of a turn anticlockwise,
and gently lift off the back
cover as shown.
Insert the SIM card into the SIM
card compartment, ensuring
that the bevelled corner (
03 ) is
located bottom right and the
gold contact area is facing
downwards.
01
02
03
Slide the locking mechanism
(
04 ) over the SIM card to hold it
in place.
Position the battery so that the
contacts align with the contacts
in the battery compartment
(05) .
Ensure that the battery and SIM
card are seated correctly before
replacing the back cover.
To replace the back cover,
locate the internal clip (
06 ) first.
Lower the back cover into
position until it clicks into place.
The cover should close tightly
using only light pressure.
04
05
06
cameo_UG_ENG.book Page 6 Friday, June 6, 2008 11:59 AM