Vertiv NetSure 502NGFB Series, Руководство по установке

Страница: 23 / 86

Vertiv
| NetSure 502NGFB Installation Manual (Section 6009) | Rev. Z 23
Bullet Nose-Type Load Distribution Circuit Breakers (List BC, LC and NC)
Procedure
NOTE!
Refer to
Figure 8
.
1. Open the Distribution Unit’s front access panel.
2. Install correctly sized bullet nose-type circuit breakers into the mounting positions located inside the
Distribution Unit, as required. Orient the circuit breaker with the ON position to the right. Ensure the
alarm contact on the back of the circuit breaker makes contact with the alarm terminal on the mounting
circuit card.
3. When finished, close the Distribution Unit’s front access panel.
Figure 8:
Installing Bullet-Nose-Type Load Distribution Circuit Breakers (List BC, LC and NC)
Front
Load Distribution
Circuit Breakers