Vertiv Liebert PEX+ Series Скачать руководство пользователя страница 19

Страница: 19 / 109

Vertiv | Liebert PEX+ Chilled Water | User Manual

Product Overview

1.5. Optional Components

• Two-stage Electric Heater

The two-stage electrical heater can be selected based on the heating requirement. The electrical heater can

be divided into two stages by configuring the controller. The heater starts step-wise according to the heating

requirement. It not only maintains the room temperature but also reduces the energy consumption.

• Up Flow Plenum

All plenums have grills at the outlet to streamline the airflow movement across the room. The plenum grills can

be manually regulated by changing the direction of airflow as per the site requirement. In the case of customized

design requirement of the Plenum, contact Vertiv local representative.

• Belt Leak Detector

Belt leak detector can provide a signal to the controller to trigger an alarm of air conditioner unit. The controller

performs several different conditions according to the setpoints:

1. Water Alarm Shuts Unit Down

2. Water Alarm Shuts Hum Down

• Smoke Detectors

Smoke detection system facilitates the data center to detect smoke in the unique air-flow environment. The

equipment room is outfitted with hot and cold aisles, underfloor and overhead spaces, each separated to contain

airflow within the space. The active smoke detection technique triggers an alarm with the first sign of smoke.

• Fire Detectors

The fire detector can check the field return air temperature. It triggers fire alarm when the smoke level continues

to rise along with elevated room temperature, or the temperature is too high and reaches the fire alarm threshold.

The primary purpose of the sensor is to examine the air temperature and to initialize the anti-fire measures

installed in the facility.

• Supply Air Temperature Sensor

Supply Air Temperature Sensor is used to modulate the heating and cooling effect of the unit by controlling the

supply air temperature through plenum. Temperature limits are field adjustable via display interface. The heating

or cooling warning activates when the temperature exceeds the thresholds.

Содержание Liebert PEX+ Series














































































































Результаты поиска

Содержание Liebert PEX+ Series

Отзывы:

Vertiv Liebert PEX+ Series, Руководство пользователя, Страница: 19 / 109

Результаты поиска

Содержание Liebert PEX+ Series

Отзывы: