Vertiv Liebert iCOM DP400/500, Инструкция по установке и эксплуатации

Страница: 53 / 180

4.3 Selecting Event Type and Setting Alarm/Warning Notification
Setting notification delays and disabling visual notification prevents nuisance notifications. Customize to notify of critical
events on your cooling system.
NOTE: If the event includes a safety function, such as high pressure, low pressure, main fan overload, etc., the safety
function executes regardless of event type or notification setting. However, notification timing delays still apply.
Table 4.2 on the next page, lists the default and adjustable notification settings for events. Table 4.3 on page 49,
describes evens for the Liebert® MC Condenser. Table 4.4 on page 50, describes events for the Liebert® EconoPhase unit.
Table 4.3 on page 49, describes events for the Liebert® DSE compressors.
4.3.1 To Select Event Type and Notification
1. Touch , then > Alarm/Event Setup .
2. Scroll or search to find the event and touch the alarm or event.
3. On the EDIT panel, touch Notifications . The EDIT panel displays the notification properties.
4. Adjust the notification properties described in Notification Properties below, then touch Save . The notification
is updated.
• Touch Cancel to discard the changes without saving.
Notification Properties
Delay
Time, in seconds, to delay notification after event trigger. Depending on the event, the delay may or may not be
adjusted. Table 4.2 on the next page lists the delays and their default settings.
• If the notification delay for the event is greater than the delay set for the event group, the group’s delay
includes the event’s delay.
4 Managing Events: Alarms, Warnings and Messages
45