GEIST™ SWITCHAIR AIRFLOW MANAGEMENT DEVICE
Quick Installation Guide
VM1180/590-2244-501A
3
RACK
FRONT
RACK
REAR
Geist SwitchAir Unit Installation
Geist SwitchAir Airflow
5
SwitchAir
5. Installing the SwitchAir
device into the rack
NOTE:
Connect to power
before attaching the SwitchAir
device to the rack. (The
SwitchAir has a standard C14
power inlet. Due to the variety
of possible power source outlet
types, an appropriate power
cord type must be determined
and supplied by the customer.)
Insert the SwitchAir device into
the open rack space at the
same 2U height as the network
switch and air trunk.
As the SwitchAir device is
inserted into the space, each
wiper tab acts as a guide to
deflect the wiper past the
switch and air trunk’s corner
and along their sides.
Once the SwitchAir device is
fully seated, install the
mounting screws to fasten the
device to the front rack
uprights.
Airflow
Airflow
Air trunk
Left front
rack upright
Side airflow
channel
