Vertiv eSure C48/58-1000B Скачать руководство пользователя страница 31

Страница: 31 / 40

Vertiv

eSure™ Power Extend Converter Mounting Bracket Kit Installation Manual (IM565460)

Rev. A

[ ] 5.

Ensure the enable/disable switch on the power extend converter is in the disable (down)

position. See Figure 20.

Figure 20:

Enable/Disable Switch

[ ] 6.

Plug the power extend converter into the distribution panel. See

Figure 21

[ ] 7.

Secure the power extend converter to the front mounting bracket with the screw provided with the
power extend converter. Torque hardware as indicated in

Figure 21

[ ] 8.

Place the enable/disable switch on the power extend converter to the enable position. See

Figure

. If two or three power extend converters are connected in parallel to a load that exceeds 1000

watts peak, they should be switched on simultaneously.

[ ] 9.

Observe the status of the power extend converter front panel local indicator. If operating normally,
this indicator should be illuminated green. See

Figure 20

[ ] 10.

Enable the external alarms or notify appropriate personnel that this procedure is finished.

[ ] 11.

Ensure that there are no local or remote alarms active on the power system.

Status Indicator

Enable / Disable Switch

Output Voltage Test Points

Enable

Disable

Vout+

Vout-

Ensure the enable/disable switch

on the power extend converter is

in the disable (down) position

before installing.

Содержание eSure C48/58-1000B









































Результаты поиска

Содержание eSure C48/58-1000B

Отзывы:

Бренды по названию

Популярные бренды

Vertiv eSure C48/58-1000B, Руководство по установке

Результаты поиска

Содержание eSure C48/58-1000B

Отзывы:

Бренды по названию

Популярные бренды