Vertilon SIB164B, Руководство пользователя

Страница: 18 / 21

SIB164B PMT Sensor Interface Board for Hamamatsu H7546B / H12428 Series
- 18 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886
/
Tel: (978) 692-7070
/
Fax: (978) 692-7010
/
www.vertilon.com
Name Function Description
J1 CHANNELS 1 - 32 Sensor interface board connector to SIB cable for channels 1 -32
J2 CHANNELS 33 - 64 Sensor interface board connector to SIB cable for channels 33 - 64
J3 -HV Negative high voltage bias input for PMT
J4 JTAG JTAG interface
J5 TRIG Trigger output
J6 PREAMP Last dynode preamplifier output
J7 EXT IN External Input (reserved for future use)
Table 2: Connectors
Name Function Description
LD1 TRIG OUT LED indicator for trigger output
SW1: 1-2 DEV ADDR 1:0 Sets the device address for control by the PhotoniQ. Set both switches to “ON”.
SW1: 3-4 DEV TYPE 1:0 Sets the device type for control by the PhotoniQ. Set both switches to “ON”.
Table 3: Switches and LEDs
Name Ref # Description
+5V P35 Main +5V power to the SIB164B supplied by the PhotoniQ through SIB connectors J1 and J2.
-HV P1 PMT cathode bias. Warning: This is a high voltage point that can exceed negative 1400 volts.
HVMON P33 Attenuated version of –HV used for indirectly monitoring PMT cathode bias.
VB P32 Anode bias and reference voltage to the SIB164B supplied by the PhotoniQ through SIB connectors J1 and J2.
+MID P29 Baseline voltage for last dynode signal processing chain. Nom2.0V.
VTH1 P30 Baseline level voltage (trimmed).
VTH2 P31 Discriminator threshold voltage.
AMP1 P2 Output of amplifier #1 in last dynode signal processing chain.
AMP2 P24 Output of amplifier #2 in last dynode signal processing chain.
AMP3 P25 Reserved
AMP4 P15 Output of amplifier #4 in zero slope discriminator.
DELAY P26 Reserved
COMP P22 Discriminator comparator output.
Table 4: Test Points