Vertical SUMMIT IP, Руководство пользователя

Страница: 67 / 70

Release 1.0 SUMMIT
IP Station User Guide April 2014
Network Configuration B-2
Appendix B: IP PHONE SETUP
Network Configuration
The User can review the current network configuration or modify a new phone network
configuration.
To access Network Config. settings:
1. Press [MENU] button and 2 (Network Config),
2. Enter the password (default=147*); the following will display:
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
3. Press the # key to toggle between multiple profiles (MFIM),
4. Press the [VOL Up/Down] buttons to advance to the next network configuration item,
5. Press the [HOLD/SAVE] button to save each setting.
To set default Config. settings:
1. In Network Config. Menu, use [VOL Up/Down] buttons to locate the Default
Config. Screen (shown), "SET DEFAULT CONFIG(DOT:*)",
2. Press the * key.
To exit Config. settings:
1. Press the [SPEAKER] button,
2. Press the * key to exit, or
3. Press the # key to Reset/Reboot the phone with new setting.
Using the Speakerphone
Activate the SUMMIT IP Speakerphone at any time (except for Paging) in place of lifting the
handset to receive or place calls.
Additionally, you may switch between the handset and Speakerphone during a call. By
keeping the handset Off-hook, the
Group Listen feature is activated, which provides
incoming audio over the speaker with outgoing audio from the handset. This permits a local
'group' to listen to both sides of the conversation without interfering with the conversation.
While in a conversation using the Speakerphone, Mute the microphone using the [MUTE]
button. When Mute is active, the [MUTE] button LED will be illuminated. To turn off Mute ,
press the [MUTE] button again.
With Auto Speaker Select, activating or accessing a feature by pressing its button will
activate the Speakerphone automatically.