LDP-9008D & LDP-9030D
User Guide
24
Scroll using the Volume up/down keys, or enter search
characters (refer to the above Character Entry Chart).
Press
HOLD
/
SAVE
to place the call
.
To enter your station user name:
Press the
TRANS
/
PGM
button,
Dial 74,
Enter the Name, up to 12 characters (press DND button to
backspace/delete a character). To input characters:
Press the second Soft button to select ABC> or abc>
mode,
To input the first character of a button, press the button 1
time (ex., for ‗a‘, press 2 button once),
To input the second character of a button, press the button
2 times (ex., for ‗b‘, press the 2 button twice.
To input the third character of a button, press the button 3
times (ex., for ‗f‘, press the 3 button three times.
Press
HOLD
/
SAVE
.
4.3.6 Using Automatic Called Number Redial
(ACNR)
When making an external call and a busy signal is received,
the system can be set to retry the number until the call is
connected, the feature is cancelled, or the maximum number of
retries is attempted
—this is Automatic Called Number Redial
(ACNR).
For each retry, the system will activate your speaker then place
the call with the microphone muted. When the remote end
answers, you must select the M
UTE
button, or lift the handset.
Either of these actions will cancel the ACNR request as well as
connect you to the remote party.
To set up ACNR, while on an outgoing call:
Select the
ACNR
Soft button,
Hang-up handset.
To cancel the ACNR request:
Press the
Stop
Soft button.
