6. Press the
Cancel
softkey to
cancel the operation.
Why does my phone display the
“No Service” message?
How to reset a user’s password?
The phone willl display the “
No
Service
” message if the SIP settings
have not been set up correctly. Check
that the SIP settings are correct in the
phone. If using the configuration files,
this could be a formatting or syntax
error. For example, when entering the
perameter “SIP line1 user
name:5551231234”, you cannot use
formatting symbols such as “-“ as in
“555-123-1234” to format the number or
the phone will not recognize it.
If a 480i user has forgotten the password
the following steps can be performed to
reset the password.
From the web client:
1. Click on the Password sub-
category under the USER main
category.
2. Enter the administrator level user
password in the Current
Password field. Enter the new
password for the user (the user’s
name for whom the password is
being modified is displayed
beside the User Name field on
the current page). Re-enter the
password to confirm the new
password.
How to set the 480i phone to
factory default?
From the 480i phone:
1. Press the
button to
enter the Options List.
3.
Click on the Set Password button
to complete the operation.
2. Select option
10. Phone Status
to enter the Phone Status options
list.
The user password can also be reset
through the configuration files. See the
section “
Setting Parameters through the
Configuration Files – Network Settings
”
in this guide for more information.
3. Select
option
4. Factory Default
.
4. Enter the administrator password
and press the
Enter
softkey.
5. Press the
Default
softkey to
restore the 480i to the factory’s
default settings.
42 SIP 480i IP Phone Admin Guide
