8
Ranger Cordless Phone User Guide
Direct Wall Mounting
If you do not have a standard wall plate, you can mount your phone directly on a
wall. Before mounting your phone, consider the following:
z
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could be hazardous when placing screws into the wall.
z
Make sure wall material is capable of supporting the weight of the Base Unit.
z
Use #10 screws with anchoring devices suitable for the wall material where
the Base Unit will be placed.
To mount the base unit on a wall:
1.
Insert two mounting screws 3 15/16 inches
apart. Allow about 3/16 of an inch between
the wall and screw heads for mounting the
phone.
2.
Plug and secure the AC Adapter cord by
following steps 2 and 3 of the "Standard Wall
Plate Mounting".
3.
Plug one end of the telephone line cord into
the LINE jack on the Base Unit. Then place
the telephone cord inside the molded channel
on the bottom of the Wall Mount stand.
4.
Place the Base Unit on the posts of the wall
screws and push down until it’s firmly seated.
5.
Plug the other end of the short telephone
cord into a telephone wall jack.
6.
Plug the AC Adapter into a standard 120V AC
wall outlet.
Ranger.book Page 8 Friday, May 18, 2007 5:51 PM
Содержание Cordless Telephone
