
PAGE 11
Accessing Data
Note: For automated communications via Modbus TCP, OPC UA or other methods, please consult your
WipFrag 3 manual.
To access the daily and yearly logfiles from the system, simply use any Windows PC connected to the
same network as the system and follow the steps below:
1.
Open the file browser.
2.
Enter the following address into the address bar, where <
ip-address>
is the IP address assigned
to the system:
\\<
ip-address>
3.
The system will prompt you for login credentials. The default credentials are:
Username:
user
Password:
Frag365
4.
You can now access the various data files recorded by the system.
a.
If you wish to view these files, copy them to a different location on your local computer
before opening them.
b.
If you wish to remove these files from the system, you may do so but the data will now
be gone forever unless it has been backed up to another location.
c.
The system will automatically delete the oldest files to make room for new ones if the
system starts running out of storage space.
d.
You cannot access the core system files which are needed for the system to operate
properly.
CAUTION:
OPENING OR EDITING LOGFILES FOR THE CURRENT DAY OR YEAR COULD CAUSE DATA LOSS
OR CORRUPTION.
WARNING!
ATTEMPTING TO CONNECT WITH THE SYSTEM THROUGH OTHER MEANS MAY CAUSE
SYSTEM CORRUPTION AND VOID YOUR WARRANTY.