Vertex Standard VXR-7000, Руководство по эксплуатации

Страница: 17 / 44

VXR-7000 FM R
EPEATER
O
PERATING
M
ANUAL
13
TX Pwr : Transmitter Power Output Selection
This parameter selects the desired power output from
the VXR-7000 on the current channel. The available val-
ues are HIGH and LOW.
Press the [
S
PACE
] bar to select “
Hi
” or “
Lo
.”
TOT Mute : Enable/disable the TOT (Time-Out Timer) beep
monitoring
When this parameter is set to “ on ,” the alert beep will
sound from the front panel speaker before the repeater
turns itself off.
RptTOT Use : Enable/disable the Time-Out Timer while op-
erating in the repeater mode
Press the [
S
PACE
] bar to toggle the Repeater TOT selects
“ yes ” or “ no .”
The TOT time is determined via dealer programming.
RptTOT Beep : Enable/disable the TOT beep Transmission
Press the [ S
PACE
] bar to toggle the TOT beep selects
“
yes
” or “
no
.”
When this parameter is set to “ yes ,” the alert beep will
be sent out on the air before the repeater turns itself off,
while oprtating in the “
REPEATER ” mode.
RPT HT : Enable/disable the Repeater Hang-on Timer
Press the [ S
PACE
] bar to toggle the Repeater Hang-on
Timer selects “ yes ” or “ no .”
When this parameter is set to “ yes ,” the repeater will
remain keyed for a desired seconds after a receiving
carrier is dropped.
The Hang-up time is determined via dealer program-
ming.
RPT GT : Enable/disable the Repeater Guard
When this parameter is set to “yes,” the transmitter in-
hibit few second before the repeater is unkeyed.
The inhibit time is determined via dealer programming.
CE27 Programming Software Instruction