Vertex Standard VXD-720 digital Скачать руководство пользователя страница 87

Страница: 87 / 98

Lone Worker

This feature prompts an emergency to be raised if

there is no user activity, such as any radio button

press or activation of the channel selector, for a

predefined time.

Following no user activity for a programmed

duration, the radio pre-warns the user via an audio

indicator once the inactivity timer expires.
If there is still no acknowledgment by the user

before the predefined reminder timer expires, the

radio initiates an Emergency Alarm.
Only one of the following Emergency Alarms is

assigned to this feature:

• Emergency Alarm

• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow

The radio remains in the emergency state allowing

voice messages to proceed until action is taken.

See

Emergency Operation

on page 64 on ways

to exit Emergency.

NOTE

: This feature is limited to radios with this

function enabled. Check with your dealer or

system administrator for more information.

Utilities

Locking and Unlocking the Keypad

You can lock your radio’s keypad to avoid

inadvertent key entry.

Procedure

to access the menu.

to “

Utilities

” and press

to select.

to “

Radio Settings

” and press

select.

to “

Keypad Lock

” and press

to select.

The display shows “

Keypad Locked

” and returns

to the Home screen.

To unlock the keypad, press

followed by

The display shows “

Keypad Unlocked

” and re

turns to the Home screen.

ance

tures

Содержание VXD-720 digital



































































































Результаты поиска

Содержание VXD-720 digital

Отзывы:

Похожие инструкции для VXD-720 digital

Бренды по названию

Популярные бренды

Vertex Standard VXD-720 digital, Руководство по эксплуатации

Результаты поиска

Содержание VXD-720 digital

Отзывы:

Похожие инструкции для VXD-720 digital

Бренды по названию

Популярные бренды