VXA-710 S
PIRIT
O
PERATING
M
ANUAL
27
S
PECTRUM
S
COPE
M
ONITOR
If you assign the Spectrum Scope Monitor feature to the
key (see page 40), you may view operating activity
on channels above and below the current operating chan-
nel while operating in the VFO, Memory Tune, and PMS
modes.
The display indicates the relative signal strength on chan-
nels immediately adjacent to the current operating fre-
quency.
Set the radio to the VFO mode by pressing the
key, if necessary.
Press (or press and hold
in) the
key to activate
t h e S p e c t r u m S c o p e
Monitor.
Once the Spectrum Scope Monitor is activated, press
the
key to change the visible bandwidth between
±15 channels and ±30 channels (default: ±30 chan-
nels). The visible bandwidth, however, depends on the
selected channel step size, so match the channel step
to those typically used in your area.
To turn the Spectrum Scope Monitor off and operate
on the centered (and displayed) channel, simply press
the
PTT
switch.
Note 1
: Audio output will be interrupted during Spectrum
Analyzer operation. This is normal.
Note 2
: The Spectrum Scope Monitor may not be acti-
vated on the BRS Memories.
Содержание VXA-710 SPIRIT
Страница 1: ...Operating Manual AIR BAND TRANSCEIVER SPIRIT ...
Страница 57: ...VXA 710 SPIRIT OPERATING MANUAL 55 NOTE ...
Страница 63: ...VXA 710 SPIRIT OPERATING MANUAL 61 NOTE ...
Страница 66: ...VXA 710 SPIRIT OPERATING MANUAL 64 NOTE ...