25
VX-920E S
EriES
O
pErating
M
anual
a
DVanCED
o
pEration
s
tatus
u
p
/D
oWn
(
16-
KEy
& 4-
KEy
V
Ersion
only
)
Press the assigned programmable key to select a
5-Tone status code from the pre-defined status list.
s
tatus
C
hECK
(
16-
KEy
& 4-
KEy
V
Ersion
only
)
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the “Message” corre-
sponding to the receive status condition per the pre-
defined status list.
l
onE
W
orKEr
Press the assigned programmable key to toggle the
Lone Worker feature “On” and “Off”. The Lone
Worker feature is designed to emit an alarm for 30
seconds when the Lone Worker Timer (programmed
by your Dealer) has expired. If the user does not re-
set the timer by pressing the
PTT
switch, the radio
switches to the Emergency mode.
DtmF C
oDE
s
Et
(
16-
KEy
V
Ersion
only
)
You may send the desired telephone number manually.
To dial a number manually, press the assigned program-
mable key, then press the desired numbers on the front
panel’s numeric key. Now, press the
PTT
switch to
send the telephone number. The DTMF tones sent dur-
ing the dialing sequence will be heard in the speaker.
ta s
Can
Press the assigned programmable key to toggle the TA
(Talk Around) scan feature “On” and “Off”.
While TA scan is proceeding, the
VX-920E
will
search both the transmit and receive frequencies (In
the 16-key and 4-key versions, the “ ” icon will
blink). When a signal is encountered on the receive
frequency, the
VX-920E
will pause until the signal
disappears (“ ” icon will appear but not blink). When
a signal is encountered on the transmit frequency, the
VX-920E
will check for activity on the receive fre-
quency every few seconds (interval programmed by
your Dealer).
