13
VX-920E S
EriES
O
pErating
M
anual
r
Rotate the
VOL/PWR
knob to set the volume
level. If no signal is pres-
ent, press and hold in the
MONITOR
button (under
the
PTT
switch) more
than 2 seconds; back-
ground noise will now be
heard, and you may use
this to set the
VOL/PWR
knob for the desired audio
level. Press and hold the
MONITOR
button more than 2 seconds (or press
the
MONITOR
button
twice
) to quiet the noise
and resume normal (quiet) monitoring.
r
To transmit, monitor the
channel and make sure it
is clear.
Press and hold the
PTT
switch. Speak into the
microphone area of the
front panel (at the lower right corner of the speak-
er grille) in a normal voice level. To return to the
Receive mode, release the
PTT
switch.
o
pEration
r
Press the (Orange)
TOP
SEL
key or
SIDE SEL
k e y ( a b o v e t h e
P T T
switch) to activate one
of the pre programmed
functions which may have
been enabled at the time
of programming by the
dealer. See the next sec-
tion for details regarding
the available features.
r
Switch the top panel’s
TOGGLE
switch to the
[
A
], [
B
], or [
Center
]
position to activate one
of the pre-programmed
functions which may
have been enabled at the time of programming
by the dealer. When this switch is in the [
A
(left)],
[
B
(right)], or [
Center
] position, the feature pro-
grammed (by your dealer) to that switch position
will be activated. See the next section for details
regarding the available features.
