Vertex Standard VX-6000L, Руководство по обслуживанию

Страница: 7 / 95

1-6
Operating Manual Reprint
Alpha Numeric
Press the assigned
PF
button of the “ Alpha Nu-
meric ” to switch the display between the Group/
Channel number, and the Group/Channel name
(alphanumeric). A tone will sound each time you
switch between numerical and alphanumerical
display.
DIM
Press the assigned
PF
button of the “ DIM ” to ad-
just the brightness of the display and key
backright.
EMG (Emergency)
Press the assigned
PF
button of the “ EMG ” to
initiate an emergency call (requires ANI board).
When an emergency call is made, not tone is emit-
ted and the display does not change. To end the
emergency call, turn the transceiver power OFF.
HA (Horn Alert)
Press the assigned
PF
button of the “ HA ” to turn
the Horn Alert function ON or OFF. If you receive
a call from the base station with 2Tone or DTMF
signaling, horn alert will activate.
When you turn Horn Alert ON, a tone will sound
and “
” appears on the display.
Home (Home Channel)
Press the assigned
PF
button of the “ Home ” to
select the pre-programmed Home Channel. Press
it again to return to the previous channel. If used
while scanning, pressing this key a second time
will change to the revert channel.
IC (Intercom)
This feature requires dual head configuration.
Press the assigned
PF
button of the “ IC ” to turn
the intercom feature ON or OFF. While ON, you
can press the PTT switch to communicate to an-
other control head operator without transmitting
over the air. When you press this key, a tone
sounds and “
” appears on the display. The in-
tercom can be used even while scanning and re-
ceiving a call.
Low Power
Press the assigned
PF
button of the “ Low Power ”
to set the radio's transmitter to the “Low Power”
mode.
Press this key again to return to “High Power”
operation when in difficult terrain.
A
DVANCED
O
PERATION
GRP UP/DWN
Press the assigned
PF
button of the “ GRP UP ” or
“ GRP DWN ” to select a different group of chan-
nels.
CH UP/DWN
Press the assigned
PF
button of the “ CH UP ” or
“ CH DWN ” to select a different channel within
the current group.
AUX A/B/C
Press the assigned
PF
button of the “ AUX A ”,
“ AUX B ”, or “ AUX C ” to turn the output port (re-
spectively).
PA (Public Address)
Press the assigned
PF
button of the “ PA ” to use
the transceiver as a PA amplifier. When you en-
able this function, a tone sounds and “
” ap-
pears on the display. The public address can be
used even while scanning and receiving a call.
MONI (Monitor)
Press the assigned
PF
button of the “ MONI ” mo-
mentarily to cancel CTCSS and DCS signaling
squelch; the “
MON
” icon appears on the display.
Press and hold this key for 1/2 seconds to hear
background noise (unmute the audio); the
MON
icon blinks on the display.
RCL (Channel Recall)
During scan, you can press the assigned
PF
but-
ton of the “ RCL ” to select the last called channel.
ST (Selectable Tone)
Press the assigned
PF
button of the “ Selectable
Tone ”, then rotate the CHANNEL selector knob
to select a 2-Tone.
SP
Press the assigned
PF
button of the “ SP ” to switch
“Front panel”, “Front panel & Body” and “Body”
speaker. When “Body” is selected, a tone sounds
and the “
” icon appears on the display. You
can use this function while scanning and receiv-
ing a call. However, all audio will be emitted from
the PA speaker.