9
VX-520U O
PERATING
M
ANUAL
O
PERATION
pear briefly.
Use the
CH
knob to select a channel, then press the
S/DW
button to en-
able the channel for scanning (“
E
” will appear in the upper left corner of
the LCD). Repeat this process for each channel you want the scanner to
check.
To remove a channel from those to be scanned, press
S/DW
again, so that
“
E
” no longer appears in the display.
After you have enabled all the channels you want to scan, turn the radio
off, then on again to return to normal operation.
Low Battery Power Indication
When the rechargeable Ni-Cd battery pack voltage reaches a low level,
the “
” indicator appears at the lower right corner of the LCD, and
the “
BUSY/TX
” indicator will blinks red.
Immediately remove the
Ni-Cd pack and install a freshly charged battery pack, or insert the
radio into the charging stand for a complete recharge cycle
. If you
plan to operate your radio for extended periods of time, you may want
to keep a spare, fully-charged pack handy.
ACENT – Revenda Autorizada VERTEX | Locação | Vendas | Assistência Técnica | VENDAS: 0800 77-55-200 ou [email protected]
www.radio-vertex.com.br
