FCC ID: K6610354640
IC ID: 511B-10354640
Alignment
3
/
10
Vertex Standard Co., Ltd.
PC
POWER SUPPLY
7.5V DC
RF SIGNAL
GENERATOR
50
Ω
DUMMY
LOAD
IN-LINE
WATTMETER
DEVIATION
METER
FREQUENCY
COUNTER
RF SAMPLING
COUPLER
TRANSCEIVER
ANT
MIC/EAR
COM port
CT-71 connection
cable
The transceiver must be programmed for use in the intended system before alignment is
attempted. The RF parameters are loaded from the file during the alignment process.
In order to facilitate alignment over the complete switching range of the equipment it is
recommended that the channel data in the transceiver is preset as the chart below.
Channels
Frequency (Simplex)
UHF-A(VTX)
Band-LOW
400.100MHz
Band-MID
435.100MHz
Band-HIGH
469.900MHz
The alignment mode is accessed by “Alignment mode” command from the computer
whilst switching on. And the alignment tool operates it automatically.
During the alignment mode, normal operation is suspended. Use the alignment tool
program running on PC.
The alignment tool outline
Installation the tool
Install the CE59 (Clone Editor) to your PC.
The re-alignment for VX-4200/4100 series may use the “Alignment” menu of CE59.
Action of the switches
When the transceiver is in alignment mode, the action of [PTT], [KEY] is ignored. All of the
action is remote controlled by PC.
Basic sequence
The data displayed in screen of this tool is temporary data, and there is fear that the
consistence of the displayed data and the data in the transceiver is failure when you do not
keep the sequence which is specified below.
Basic sequence
