Vertex Standard VX-1210, Руководство по эксплуатации

Страница: 17 / 40

16 VX-1210 O
PERATING
M
ANUAL
TELCALL O
PERATION
[
J3E
(
LSB/USB
)
MODE ONLY
)]
The VX-1210 allows easy “TELCALL” Operation for Autopatch dialing.
When the “TELCALL” feature is activated, the clarifier is disabled.
Sending a TELCALL
1. Press the TOGGLE switch (assigned to the “SELCALL” feature) momentarily to
enable selection of the code memory.
2. Rotate the SEL knob to select (display) the code memory of the station you want to
SELCALL.
3. Press the TOGGLE switch (assigned to the “TELCALL” feature) momentarily to
enable to TELCALL feature.
4. Rotate the SEL knob to select the Autopatch memory string you wish to send.
5. Press and hold in the TOGGLE switch (assigned to the “TELCALL” feature) for 1/2
second to send the TELCALL (corresponding to a telephone number).
6. When the communication is finished, press and hold in the TOGGLE switch (as-
signed to the “TELCALL” feature) for 1/2 second, while holding in the PTT switch to
send the “Hang-up” signal.
Manual Sending
If your VX-1210 has not had the telephone number stored into the Autopatch memory,
you can pre-program and send the telephone number temporarily.
Here is the manual sending procedure:
1. Call the station that is connected to the telephone system via the SELCALL feature
first, as described previously.
2. Press the
TOGGLE
switch (assigned to the “TELCALL” feature) momentarily.
3. Rotate the SEL knob to select (display) “
AUX xxxx AUX xxxx
AUX xxxx AUX xxxx AUX xxxx
.”
4. Press and hold in the
SEL
knob for 1/2 second, then rotate the
SEL
knob to select the
first digit of the telephone number you want to send.
5. Press the
SEL
knob momentarily to step to the next digit’s place. Use the
SEL
knob
again to select a number and to step to the next entry.
6. After entering all digits of the telephone number you want to send, press and hold in
the SEL knob for 1/2 second to save the telephone number into the Autopatch memory
temporarily.
7. Press and hold in the TOGGLE switch (assigned to the “TELCALL” feature) for 1/2
second to send a TELCALL (corresponding to the telephone number).
Advanced Operation