EVX-530 S
EriES
O
pErating
M
anual
37
s
tatus
s
et
(
eVx-534 & eVx-539
)
You can change the 5-tone status code using this
function:
r
Press, (or press and hold), the assigned
PF
key to
change the 5-tone status code.
r
Enter the 5-tone status code directly from the
keypad ([
0
] - [
9
] key).
r
Press the [
D
] key, The display indicates “
- SET -
”
briefly and store the new number to the 5-tone
status code.
You may cancel the new setting by pressing
the [
C
] key. In this case, the display indicates
“
- CANCEL -
” briefly.
s
tatus
u
p
/d
oWn
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
select a 5-tone status code from the pre-defined status
list.
s
tatus
c
hecK
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
check the 5-tone receive status code. When you press
this key, the display will indicate the “Message” cor-
responding to the receive status condition per the pre-
defined status list.
a
dVanced
o
peratIon
d
uty
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
toggle the Duty function of the 2-tone, 5-tone, or
MDC1200
®
“On” and “Off”.
When the Duty function is set to “On”, the display in-
dicates “
DUTY ON
” briefly and the user will always
hear (depending on the sub-audio signaling) all traf-
fic on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone,
5-tone, or MDC1200
®
.
When the Duty function is set to “Off”, the display
indicates “
DUTY OFF
” briefly and the user will
NOT hear normal radio traffic on the paging chan-
nel. The radio will sound the paging alert and unmute
only when it receives the programmed 2-tone, 5-tone,
or MDC1200
®
.
Id c
hecK
(
eVx-534 & eVx-539
)
This function allows logged ID of the DTMF Signal-
ing or 5-tone Signaling to be reviewed and relayed
(5-tone Signaling only) to a specific station:
r
Press, (or press and hold), the assigned
PF
key to
display the logged ID of the DTMF Signaling or
5-tone Signaling.