CAUTION: Only down load the correct software for your version 0.08/4.21 or 0.09/5.11 for the DMU-
2000. Do not keep both versions on your computer.
Ver. 4.21 or 5.11 CPU implements improvements also includes all previous updates):
•
ONLY Changes to support the New FTdx5000 Series Transceiver
Install the data file to PC
1.
Down load the DMU-2000 data file [
DMU-2000_V008_2-25-10.zip
] or [
DMU-2000_V009_2-
25-10.zip
] from the following website:
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=66EA
91711DFB68C03DED4AD35153E12C&DivisionID=65&isArchived=0
2.
Save the DMU-2000 data file [
DMU-2000_2-25-10.zip
] to the desktop on your computer.
3.
Unzip and Extract the contents of [
DMU-2000_2-25-10.zip
] to the desktop of your computer.
4.
You will find the
CF1
and
CF2
folders on your desktop.
The programmer and software are now stored on your computer on the desktop. The files designated
in the last step above are ready to create two CF cards to use in updating your DMU-2000.
*You must have two separate, blank CF cards (32 MB or more) and have a CF card reader slot.
NOTE
: Do not copy the folders to the CF cards, only the files (V0.xxx WinZip and md5sum). The
system and the application files must be on separate CF cards. Do not save them to the same CF card.
Be sure the CF card does not contain any previous data or partitions. You may need to make a single
patrician and reformat a previously used CF card.
Now you will transfer each of the needed files to separate CF cards. When you open the CF1 folder
you will see the two files. Copy both system files and paste them to the CF card drive and create a CF
card. Remove the CF1 card and insert another card. Now open the CF2 folder and copy or paste both
application files to the CF card drive and create a CF card.
It is strongly recommended that you mark each CF card as CF1 and CF2 to prevent mixing up the
files. The SYS file (CF1) must be installed before CF2 or the update will not work.
DMU-2000_V008_2-25-10.zip
DMU-2000_V009_2-25-10.zip
If you have version
03xx or 04xx,
you must
create two cards; one with
CF1_V008-sys
and
another with
CF2_V421-app
.
•
Open the
CF1
folder and copy two files to
CF card 1
•
Open the
CF2
folder and copy two files to
CF card 2
If you have version
05xx,
you must create two
cards; one with
CF1_V009-sys
and another
with
CF2_V511-app
.
•
Open the
CF1
folder and copy two files to
CF card 1
•
Open the
CF2
folder and copy two files to
CF card 2
