E. “AMBIENT LIGHT SETTING”
This setting choice is for when you desire the light to become active at sunset.
On the App screen "Ambient Light Setting" is a choice whereby using the slider between Low,
Medium or High and choose when you would like the sensor light to become active during sunset /
night time. Example, if you place the slider to the far left, the light will come on at early dusk; If the
slider is to the far right, the light will not activate until night time.
8. To Perform sensor testing after a day time installation,
To test if your motion sensor light is active and operational during day time - Just walk past the light
motion sensor area and on detection and a noticeable LED Red light will flash for 2 seconds through the
motions sensor lens cover. This indication this will be repeated when you walk past the detection area
that shows the light is operations and active.
9.
Reset to original default setting
Should you forgot the password, you can switch off the power to the light 4 times (off-on-off-on)
within 3 sec., and the light will reset and a new password can be entered.
16
