5
www.versitron.com
4. For 100BaseFX Module
4.1
Adding 100BaseFX Module
This 16-port switch has a module port for a 100BaseFX connection extension. You can add one
100BaseFX module to the switch for long distance fiber optic cable connection. But
when this
module is added, the 16th TP port will be disabled and this FX port becomes the 16th port.
Please follow the steps to add the module to the switch:
1.
Turn off the switch
2.
Loosen the screws of the blank cover and remove the cover from the module port of the
switch.
3.
Slide in the module into the module port.
4.
Tighten the screws of the module to the switch.
5.
Connect the fiber optic cable to the FX port of the module.
6.
Power on the switch.
7.
Refer to Section 7 to configure Port 16 to
100Mbps, full duplex
.
Module Port