www.versitron.com
18
3.4.1 Port-based VLAN
Click [VLAN Mapping Table]
This page is used to setup members for each VLAN group. Total of 16 VLAN groups are
supported.
The steps to configure the member ports are:
1.
Select Group number: 0 ~ 15.
2.
Set [
Yes
] on the selected port to include it into the member port list.
Note:
One port can belong to more than one VLAN groups. VLAN group table mapping index is based
on the least four bits (bit 3 ~ bit 0) of the PVID of the input port.
