www.versitron.com
15
The web page is shown as follows when a successful login is performed:
The left side shows the menu list. The list includes:
[Port Setup]
: shows port status and port configuration setup
[IP Setup]
: setup IP mode and related settings
[VLAN Setup]
: setup VLAN related settings
[Password Setup]
: change password
[Restore Default]
: remote boot the switch
[About]
: shows management software information
3.2 Port Setup
The middle part of previous figure shows all port status of the connected switch. The right side
shows port configuration setup page.
Port Status
Port Status page displays the current port status. The status indications are:
Port
Port number (FX : FX port)
Link
Port link status, Up = link up, Down = link down
Speed
Port speed, 100M = 100Mbps, 10M = 10Mbps
Duplex
Duplex mode used, Full = full duplex, Half = half-duplex
Flow Control
Flow control status, enabled, disabled
Note
:
The switch is featured with flow control enabled for all ports. However, the flow control may be
disabled after auto-negotiation with the connected device, if the connected device does not have
flow control ability.
