9-
5.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. By connecting
to the 1/4” microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units for Stand by,
Function and Mode selection
5.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channels so that the units can receive DMX signal.
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press and keep
ENTER
button pressed up to when
the display stops blinking or storing automatically 8 seconds later. To go back to the
functions without any change press the
MENU
button again. If you use please refer to the
following diagram to address your DMX512 channel for the first 4 units.
1 channel mode:
3 channels mode:
Blackout
Blackout the unit
Function
1. SynchroStrobe
2. Asynchro Strobe
3. Sound Strobe
Select Show
(Show 1-8)
Select Speed
1. Slow
2. Middle
3. Fast
Mode
Sound/Strobe
(LED OFF)
Show
(LED ON)
LED blinking
6-
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(1 channel) or
(3
channels ) mode.
Once select, press the
ENTER
button to setup or automatically exit menu
mode without any change after 10 seconds. To go back to the functions without any change
press the
MENU
button
Slave Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(master) or
(slave 1) or
(Slave 2) mode.
Once select, press the
ENTER
button to setup or automatically exit
menu mode without any change after 10 seconds. To go back to the functions without any
change press the
MENU
button
Show Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(Random show) or
(show
1) or
(Show 2) or … or
(show8).
Once select, press
ENTER
button to
store or automatically exit menu mode without any change after 10 seconds. To go back to
the functions without any change press the
MENU
button
Sound
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(sound on) or
(sound off).
Once select, press
ENTER
button to setup or automatically exit menu mode without any
change after 10 seconds. To go back to the functions without any change press the
MENU
button
Blackout mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(blackout) or
(normal).
Once select, press
ENTER
button to setup or automatically exit menu mode without any
change after 10 seconds. To go back to the functions without any change press the
MENU
button.
