5-
4.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling 10
seconds. Back to the functions without any change press
MENU
button. The main functions
are shown below:
DMX 512 Address Setting
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX 512 address.
Once the address has been selected, press
ENTER
button to setup or automatically exit
menu mode without any change after 10 seconds. Back to the previous functions without
any change press
MENU
button.
Channel Mode
10-
6. DMX512 Configuration
1 & 3-CH modes:
