VERSE OUTSIDER318, Руководство пользователя

Страница: 7 / 24

5
OUTSIDER318 - User’s Guide
EEN N
CONTROLSANDCONNECTIONS
1
1. LEVEL: adjusts the incoming signal level.
2. Status LEDs:
- Prot.: indicates that the internal amplifier switched to protection mode due to a fault
of the amplifier itself or of the connected speakers (please call the technical support)
- Temp.: indicates that the internal amplifier switched to protection mode due to
excessive heating. Under these conditions a limiter is activated to steadily reduce the
power until the thermal balance is reached. Please reduce the input signal to allow
to reach the normal load conditions.
- Comp.: indicates activity of the compressor. If the signal passes over a safety thresh-
old, the compressor guarantees a good quality playback without acoustic distortion,
damping the appropriate signal frequencies. The system operates in total safety. If the
LED is constantly On, there is an excess of signal. In this case, please reduce the in-
coming signal level.
- Sign.: flashes when signal is incoming.
- ON: indicates that te speaker is powered on.
3. Preset LED-lighting switches:
- 3dbB Hi-damp: preset that damps high frequencies by 3dB. Designed to be used in a
large ambience, in order to balance the sound at a long distance where the decay of
mid to low frequencies is higher.
- 3dB Mid-damp: preset that damps mid frequencies by 3dB. Designed to boost low
and high frequencies, especially for these music genres like dance or house which re-
quire a “louder” sound.
- 3dB Lo-damp: preset that damps low frequencies by 3dB. Designed to balance the
natural reinforcement of low frequencies occurring when the speaker is placed in cor-
ners or side by side to other speakers of the same kind.
4. Input: XLR input for line signal.
5. Link: sends on output the same signal coming from INPUT connector. This allows the
cascade connection of different devices to the same sound source.
4 5
2
7
6
8
3