User Instructions
VC1727C/R8
- 2 -
Introduction:
Versatile Mobile Systems, Inc. is providing your company with hardware for your workforce automation
program. This document describes the setup procedures for the Symbol PDT 1740 and the Versatile
Systems VC1727C/R8 cradle, using the highly reliable RIM R802D Wireless modem.
RF Exposure Warning
–
All persons must be at least 20 cm from the antenna when the transmitter is
operating to comply with FCC RF exposure requirements.
Contents:
Introduction
Installation instructions
1.
Cradle installation
2.
Attaching antenna cable terminal
3.
Connecting power
4.
Electrical check
VC1727C/R8 testing instructions
1.
Setup procedures
2.
Port/function selection
3.
Modem test
5.
Global Positioning System (GPS) Test
Contact information
Installation instructions:
VC1727C Cradle
This document provides instruction for installing the power connections to the VC1727C Wireless Cradle.
It assumes the installer has electrical knowledge in equipment installation.
Parts List
Suggested Tools
•
VC1727 Cradle with Round amount
•
Electrical installation kit
•
Cellular antenna
•
GPS antenna
•
Digital Multi-meter
•
Pliers
•
Wire Cutters
•
Wire Crimper
•
Type 1 & 2 Phillips Screwdriver
•
Small Flat Head Screw Driver
•
11/32" Nut Driver
•
Crimper, Coax Cable, RG-58, RG-174
•
Wire Striper, Coax, RG-58, RG-174
Important
!
Please read the
‘Installation Notes’
prior to beginning installation of the cradle.
Installation Notes (1):
If possible, to reduce the chance of electrical shock and possible damage to equipment during installation,
disconnect the battery before connecting the cradle wiring. Be aware some vehicles have electrical
components that require a constant power supply to maintain programmed settings. Disconnecting the