User Instructions
VC1727C/R8
- 10 -
Step 2:
From the
All
menu tap the ptelnet
button or equivalent program.
Step 3:
Tap the pull down menu bar
button. From the
Options
menu list select ‘
Serial
’. Set the
‘Serial options’
Baud
rate at
4800
by tapping the
6
6
icon and selecting 4800 from the displayed list. Tap
the
[Ok
]
button. This will set the desired ptelnet baud rate and return you to the ptelnet main display screen.
Step 4: :
Make sure your palm is plugged into the cradle, antennae are attached, the VC1727C cradle is
turned on and the GPS port is active.
Step 6:
Tap the
[On]
button at the bottom of the display screen.
The GPS telemetry should now be scrolling up the display screen of the PDT1740. This is the data used to
determine the position of the device.
Location acquisition time can vary depending on conditions.
-15 seconds if all data is known.
-45 seconds if the initial position, time and almanac are known with the ephemeris unknown.
-1.5 minutes utilizing the Garmin auto locate feature if the initial time and position are unknown.
-5 minutes if virtually no data is available.
Contact information
For further assistance with these instructions call: Versatile Mobile Systems, Inc., Technical support at
800-VMS-3125
, (800-867-3125).
Versatile Mobile Systems, Inc.
19105 36th Ave. W., Suite 103
Lynnwood, WA 98036
http://www.versatilemobile.com
Phone:
(425) 778-8577
(800) 262-1633