VersaLogic VL-EPU-4460, Справочник по аппаратуре

Страница: 13 / 63

Configuration and Setup
13 VL-EPU-4460 Reference Manual
Configuration and Setup
Initial Configuration
The following components are recommended for a typical development system with the Condor
EPU:

ATX power supply

VL-CBR-4005B paddleboard and VL-CBR-4005A cable. Refer to the chapter titled “VL-
CBR-4005B Paddleboard”, beginning on page 48 for details on the VL-CBR-4005B
paddleboard.

USB keyboard and mouse

SATA hard drive

USB CD-ROM drive

VGA monitor and a VL-CBR-2032 Mini DisplayPort-to-VGA adapter

A thermal solution (using either VersaLogic accessories or a customer-designed solution)
You will also need an operating system (OS) installation CD-ROM.
Basic Setup
The following steps outline the procedure for setting up a typical development system. The
Condor should be handled at an ESD workstation or while wearing a grounded antistatic wrist
strap.
Before you begin, unpack the Condor and accessories. Verify that you received all the items you
ordered. Inspect the system visually for any damage that may have occurred in shipping. Contact
Support@VersaLogic.com immediately if any items are damaged or missing.
Gather all the peripheral devices you plan to attach to the Condor as well as their interface and
power cables. Attach standoffs to the board to stabilize it and make it easier to work with.
The next figure shows a typical setup for the Condor in the development environment.
1. Attach Cables and Peripherals

Attach a VGA monitor to the baseboard’s Mini Disp+ connector using a VL-CBR-
2032.

Attach a SATA hard disk to the baseboard’s SATA connector using a VL-CBR-0702 cable.

Attach a VL-CBR-4005B paddleboard to the baseboard’s User I/O connector.

Connect a USB keyboard and USB mouse to the USB Type-A connectors on the VL-CBR-
4005B paddleboard.

Attach a USB CD-ROM drive to one of the USB Type-A connectors on the VL-CBR-4005B
paddleboard.
2