VersaLogic EPM-PS1, Справочное руководство, Страница: 17 / 23

EPM-PS1 Reference Manual
13
Operation
Main Power Input
Power is input to the EPM-PS1 through connector J3, which is a two-position, 5.08 mm screw
terminal accepting AWG 16-14 insulated wire. Input voltage can range from 9V to 40V.
Table 3: Main Power Input Connector Pinout
J3
Pin
Signal
Name
Description
1 VIN +9-40 VDC Input
2 GND Input Ground
Power Out
Power is output through connector J5 and the PCI (J2) and ISA (J4) connectors.
J5 C
ONNECTOR
P
OWER
O
UT
The J5 connector is a series of four two-position, 5.08 mm screw terminals accepting AWG 16-14
insulated wire.
Table 4: Power Out Connector Pinout
J5
Pin
Signal
1 +5V out
2 Ground
3 +12V
out
4
-
12V out
ISA
AND
PCI C
ONNECTOR
P
OWER
O
UT
Power is output on the PCI (J2) and ISA (J4) connectors as shown in Figure 8 and Figure 9.
Available ground pins are also shown in these figures.
3