Versalift VST-9000I-E100, Руководство по обслуживанию и установке

Страница: 70 / 299

106-3 VERSALIFT VST-9000-I-E
P
ARTS &
ASSEMBLIES
PART ORDERING AND PRODUCT SUPPORT INFORMATION
The following sections contains replacement parts information for the VERSALIFT Aerial Device,
including normal available options.
Your cooperation in furnishing as much information as possible will assist us in fi lling your orders
correctly and in the shortest possible time.
When ordering parts always furnish:
1. Identifi cation of the Lift - Model and serial number of the lift are located on the data plate.
The serial number can also be found stamped on the turret base plate and/or pedestal top
plate.
2. Part Numbers and Description - Each part ordered needs to have correct part number
and description. The part numbers and descriptions can be found on following pages in this
section.
An Itemized parts list with illustration is included for each assembly, hydraulic circuit, control
system and electrical circuit. All parts are identifi ed by a reference letter corresponding to a
like letter in the parts list (see assembly identifi cation example 1 on the following page).
An itemized service parts list with illustration is included for each major component. All parts
are identifi ed by a reference number corresponding to a like number in the service parts list
(see component identifi cation example 2 on the following page). The quantities listed are
the amount required for one complete assembly or subassembly.
If there is any doubt as to the correct part numbers, please contact your local distributor or
the customer service department at Time Manufacturing Company.
3. Shipping Method - Unless otherwise instructed, all shipments will be made via motor freight
collect or UPS prepaid and charged on our invoice.
4. Returns - Any parts that may need to be returned must have a return goods authorization
number on the outside of the box, and the correct paperwork including the invoice number
or purchase order number accompanying the part.
Replacement Parts - All parts are original VERSALIFT replacement component. Authorized
VERSALIFT dealers are assured of being furnished with authentic parts when purchased from
Time Manufacturing Company. Dealers and customers not using original replacement parts from
VERSALIFT may experience operational and safety related premature fatigue, wear, and/or failure
of components.
NOTE:
On some Assembly and Installation drawings included in the following sections, some
components are marked as shipped loose items. These items will require installation during
the Versalift installation procedure. Refer to any component identifi cation instructions in
the ship loose box. Also refer to the Part Details and Installation drawings in this manual
for any additional information needed.