Versalift VST-9000I-E100, Руководство по обслуживанию и установке

Страница: 13 / 299

SAFETY
VERSALIFT SAFETY 101-2
Throughout this manual there are danger and caution
notes to warn of safety hazards while installing,
maintaining, or servicing the
Versalift . Any personnel
performing these procedures should be aware of
these concerns and responsibilities.
One hazard associated with installing or servicing
this machine is lifting heavy objects. This is true
whether the lifting is being done manually or
mechanically. The weight, length, and other
characteristics of the booms, pedestal, turret, and
outriggers make it imperative that care be taken to
balance and support them adequately when they are
lifted. Care must be taken to balance these items
and to keep personnel clear when lifting.
Never clean, oil, or adjust a machine while it is in
motion. Special care must be used while the guards
or protective covers are removed. The moving parts
of the lift will cause crushing injuries if precautions
are not taken. The guards and protective covers must
be replaced as soon as the service work is complete.
Hydraulic oil is flammable so contact between
hydraulic oil and sources of high heat or open flames
must be avoided. Contact with hot hydraulic oil may
cause serious burns which require immediate
medical attention.
Failure to relieve pressure before disconnecting of
the hydraulic hoses or fittings may result in a high
pressure hydraulic oil spray. This spray or mist can
puncture and become embedded beneath the skin
or contaminate the eyes. Relieve pressure by
activating the control valve while the hydraulic power
source is off or disengaged. Loosen connections
slowly to make certain pressure is relieved.
A stability test, per current ANSI A92.2 requirements,
must be performed on the unit after it is mounted.
This must be done before anyone operates the lift
from the platform.
After servicing any portion of the hydraulic system,
extend and retract all of the hydraulic cylinders
several times to force any trapped air from the
system. Never operate the lift from the platform until
this has been accomplished.
Warning and instructional decals are installed at
numerous locations on the aerial lift to warn personnel
of the potential hazards during the use and operation
of the
Versalift aerial lift. If any decals are defaced,
illegible, or lost they must be replaced immediately.
No manual can address every conceivable hazard
while installing, maintaining, or servicing an aerial lift.
SAFETY
The prevention of accidents is dependent on good
judgement and common sense on the part of the
service personnel.