Versa Networks CSG700 Series, Руководство по оборудованию

Страница: 10 / 39

• If you press and hold the button for 10 seconds or more, the power for the appliance turns off and the appliance
shuts down.
Reset Button
The Reset button on the rear panel of a CSG700 series appliance resets the appliance. The reset functionality depends
on the number of times you press the butter within a span of 30 seconds, as described in Table 3. In between each
press on the reset button, you must pause for a second to register the key presses.
The Reset button is recessed so that it is not accidentally pressed while the appliance is operational.
To press the Reset button, use a sharp narrow tool. Each time you press the Reset button, you hear a buzzer sound.
Table 3: Reset Button Press Behavior
Number
of Presses
Behavior
2 Reset the appliance to the factory-default snapshot.
4 Reset the appliance to the branch prestaging configuration.
6 Reset the appliance to the branch staging configuration.
8 Reset the appliance to branch post-staging configuration.
You can reset the appliance to the factory-default configuration by issuing the request system reset CLI command.
Reset the Appliance to the Factory-Default Configuration from the CLI
You can reset the appliance to the factory-default configuration from the CLI. You can connect to the appliance through
the serial console port or by using SSH.
The factory default reset procedure may take up to 20 minutes to complete. Do not power off the appliance during this
time.
To reset an appliance to the factory default configuration:
1. To connect to the appliance through the serial console port, see Configure a Management Console to Connect to a
CSG700 Series Appliance .
2. Log in to the appliance CLI using the username "admin" and the password "versa123".
Note: To connect to the appliance using SSH, connect your PC to the management port of the appliance. For the port
mapping on the CSG700 series appliance, see
Interface Numbering . The management port has the default static IP
address 10.10.10.10/24. Configure the PC IP address to any IP from this segment, for example, 10.10.10.1/24. Open an
SSH session to the appliance using its IP address, 10.10.10.10.
https://docs.versa-networks.com/Hardware/Cloud_Services_Gateway_700_Series/Complete_CSG700_Series_Hardware_Gui…
Updated: Tue, 18 Oct 2022 06:10:27 GMT
Copyright © 2021, Versa Networks, Inc.
10