19
ELECTRONIC TIMER
The timer programme consists only of a buzzer which may be set for a maximum
period of 23 hours and 59 minutes.
If the AUTO is flashing push the
button.
To set the time, push the
button and the
or
until you obtain the
desired time (fig. 4.4).
Having finished the setting, the normal time will appear on the panel and the
symbol will appear.
The countdown will start immediately and may be seen at any moment on the panel
by simply pressing the button
.
At the end of the time, the
symbol will be switched off and an intermittent buzzer
will go off; this can be stopped by pressing any one of the buttons (not
or
).
If the oven is switched on, you must switch off manually.
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
By pressing the
button you can choose from three variations.
AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven cooking programme.
These operations are done in the following way:
1. Set the length of the cooking time by pushing the
button and the
button
to advance, or
to go back if you have passed the desired time (fig. 4.5).
The AUTO and the
symbol will be on.
2. Set the end of the cooking time by pressing the
button (the cooking time
already added to the clock time will appear), and the
button (fig. 4.6); if you
pass the desired time you may get back by pushing the
button.
After this setting, the
symbol will go off. If after this setting, the AUTO flashes
on the panel and a buzzer goes off, it means there was an error in the programming.
In this case, modify the end of cooking time or the cooking time itself by following
the above instructions again.
3. Set the temperature and the cooking programme by using the switch and
thermostat knobs of the oven (see specific chapters).
Now the oven is programmed and every thing will work automatically, that is the oven
will turn on at the right moment to end the cooking at the established time.
During cooking, the
symbol remains on.
By pushing the
button you can see the time that remains until the end of
cooking.
At the end of the cooking time the oven will turn off automatically, the
symbol will
turn off,
AUTO
will flash
and a buz zer will sound, which can be turned off by pushing
any of the but tons (not
or
).
Turn the switch and thermostat knobs to zero and put the programmer onto “manual”
by pressing the
button.
Attention: A power cut makes the clock go to zero and cancels the set programmes.
After a powercut, “12:00” will flash on the panel.
Fig. 4.4
Fig. 4.5
햵
Fig. 4.6
The cooking program may be cancelled at any time by pushing
.
In this case the oven shall be switched off manually.
Содержание VEFSGE 365
Страница 27: ...27...
