background image

4

USER INSTRUCTIONS

GENERAL INFORMATION

1.   

 

WARNING!!

 

This appliance shall not be used for space heating. This 

information is based on safety considerations.

2.  AlI openings in the wall behind the appliance and in the floor 

under the appliance shall be sealed.

3.  Keep  appliance  area  clear  and  free  from  combustible 

materials, gasoline, and other flammable vapors.

4.  Do not obstruct the flow of ventilation air.

5.  Disconnect  the  electrical  supply  to  the  appliance  before 

servicing.

6.  When removing appliance for cleaning and/or service;

A.  Disconnect AC power supply.
B.  Carefully remove the range by pulling outward.

 

CAUTION:

 Range is heavy; use care in handling.

7. 

Electrical Requirement

Electrical  installation  should  comply  with  national  and  local 

codes.

8.  The misuse of oven door (e.g. stepping, sitting, or leaning on 

them) can result in potential hazards and/or injuries.

9.  When installing or removing the range for service, a rolling lift 

jack should be used. Do not push against any of the edges of 

the range in an attempt to slide it into or out of the installation. 

Pushing or pulling a range (rather than using a lift jack) also 

increases  the  possibility  of  bending  the  leg  spindles  or  the 

internal coupling connectors.

 

 

WARNING!!

ELECTRICAL GROUNDING INSTRUCTIONS

The range must be electrically grounded in accordance with 

local codes or, in the absence of local codes, with the National 

Electrical Code, ANSI/NFPA No. 70-latest edition, in Canada 

Canadian Electrical Code. Installation should be made by a 

Iicensed electrician.

FOR  PERSONAL  SAFETY,  THIS  APPLIANCE  MUST  BE 

PROPERLY GROUNDED.

If  an  external  electrical  source  is  utilized,  the  installation  must 

be  electrically  grounded  in  accordance  with  local  codes  or,  in 

the  absence  of  local  codes,  with  the  national  Electrical  Code,  

ANSI/NFPA 70.

REPLACEMENT PARTS

Only  authorized  replacement  parts  may  be  used  in  performing 

service on the range. Replacement parts are available from factory 

authorized parts distributors. Contact the nearest parts distributor 

in your area.

IMPORTANT PRECAUTIONS AND 

RECOMMENDATIONS

After having unpacked the appliance, check to ensure that it is not 

damaged.

In  case  of  doubt,  do  not  use  it  and  consult  your  supplier  or  a 

professionally qualified technician.

Packing  elements  (i.e.  plastic  bags,  polystyrene  foam,  nails, 

packing straps, etc.) should not be left around within easy reach 

of  children,  as  these  may  cause  serious  injuries.  The  packaging 
material is recyclable and is marked with the recycling symbol 

 .

• 

Do not attempt to modify the technical characteristics of the 

appliance as this may become dangerous to use.

• 

Do not carry out cleaning or maintenance operations on the 

appliance without having previously disconnected it from the 

electric power supply.

• 

After use, ensure that the knobs are in 

OFF

 position.

• 

Do  not  allow  children  or  other  incapable  people  to  use  the 

appliance without supervision.

• 

During and after use of the range, certain parts will become 

very hot. Do not touch hot parts.

• 

Keep children away from the range when it is in use.

• 

Some models are supplied with a protective film on steel and 

aluminium parts. This film must be removed before installing/

using the appliance.

• 

Fire risk!

 Do not store flammable material in the oven and in 

the warming drawer.

• 

Make sure that electrical cables connecting other appliances 

in the proximity of the range cannot come into contact with the 

hob or become entrapped in the oven door.

• 

Do not line the oven walls with aluminium foil. Do not place 

shelves,  broiler  pan,  pans  or  other  cooking  utensils  on  the 

base of the oven chamber.

• 

The manufacturer declines all liability for injury to persons or 

damage  to  property  caused  by  incorrect  or  improper  use  of 

the appliance.

• 

To avoid any possible hazard, the appliance must be installed 

by qualified personnel only. Any repairs by unqualified persons 

may result in electric shock or short circuit. In order to avoid 

possible  injuries  to  your  body  or  to  the  appliance,  do  not 

attempt any repairs by yourself. Such work should be carried 

out by qualified service personnel only.

• 

Danger  of  burns!

  The  oven  and  cooking  accessories  may 

become very hot during operation. Make sure children are kept 

out of reach and warn them accordingly. To avoid burns use 

kitchen clothes and gloves when handling hot parts or utensils.

• 

Stand away from the range when opening oven door. Hot air 

or steam which escapes can cause burns to hands, face, and/

or eyes.

• 

Never  clean  the  range,  oven  and  the  warming  drawer  with 

a high-pressure steam cleaning device, as it may provoke a 

short circuit.

• 

This appliance is intended for use in your household. Never 

use the appliance for any other purpose!

• 

If you should decide not to use this appliance any longer (or 

decide to substitute an older model), before disposing of it, it 

is recommended that it be made inoperative in an appropriate 

manner in accordance to health and environmental protection 

regulations, ensuring in particular that all potentially hazardous 

parts be made harmless, especially in relation to children who 

could  play  with  old  appliances.  Remove  the  door  and  the 

warming drawer before disposal to prevent entrapment.

Содержание VCLFSEE 365 Series

























Отзывы: