Betriebsanleitung BARISSIMA, V 1.00, 02.2015, Deutsch
Seite 23
4.1.1
Demand on the executive staff
•
All persons who work on the machine must read the user manual
or be taught by trained staff.
•
This machine is not intended for use by persons (including Children) with reduced
intellectual, sensory and physical abilities or lack of experience and knowledge,
unless they are supervised by a person responsible for their safety.
•
Prevent access for children or contact with domestic animals, plants or insects. This
also applies to the packaging material, small parts and detergents
4.2
Setup / Settings
-
Connect the milk suction line.
-
Plug in the power cord.
4.3
Filling of the Container
Important!
Fill the milk container only with cooled milk. Never fill freeze-dried or powdered milk in
the milk container.
Make sure that no foreign bodies get into the milk pump.
•
Foreign bodies may damage the grinder. This damage is excluded from the
warranty.
Fill the milk without milk cooler
Insert the milk hose with the suction nipple in a milk carton.
Fill the milk with milk cooler
-
Open the milk cooler.
-
Remove the milk container and fill it with pre-cooled milk.
-
Put the milk container back into the milk cooler.
-
Put the milk hose into the milk container.
-
Close the milk cooler.
Important!
Please refer to chapter "7 Cleaning / Care" - "HACCP hygiene self-control“
4.4
Switching on the milk foamer
-
Connect the milk suction line.
-
Switch on the main switch.
-
Machine heats up automatically.
-
The display shows the released buttons and you can select products.