background image

 

17 

Warranty 

The Vernier Digital Radiation Monitor is manufactured by a third party, and is 

subject to their warranty. 
This product is warranted to the original owner to be free from defects in materials 

and workmanship for one year from the date of purchase with the exception of the 

Geiger-Mueller tube, which is warranted for 90 days, and with the exception of the 

battery, which is not included in this warranty. Vernier Software. will, at its own 

discretion, repair or replace this instrument if it fails to operate properly within this 

warranty period unless the warranty has been voided by any of the following 

circumstances: misuse, abuse, or neglect of this instrument voids this warranty; 

modification or repair of this instrument by anyone other than Vernier Software 

voids this warranty; contamination of this instrument with radioactive materials 

voids this warranty. Contaminated instruments will not be accepted for servicing at 

our repair facility. 
The user is responsible for determining the suitability of this product for his or her 

intended application. The user assumes all risk and liability connected with such use. 

Vernier Software is not responsible for incidental or consequential damages arising 

from the use of this instrument. 

 
 
 
 
 
 
 
 
 

 

Vernier Software & Technology 

13979 S.W. Millikan Way 

 Beaverton, OR 97005-2886 

Toll Free (888) 837-6437 

 (503) 277-2299 

 FAX (503) 277-2440  

[email protected] 

 www.vernier.com 

 

Rev. 1/31/08 
Logger

 Pro

, Vernier LabPro, and other marks shown are our registered trademarks in the United States. 

CBL 2, TI-GRAPH LINK, and TI Connect are trademarks of Texas Instruments. 
All other marks not owned by us that appear herein are the property of their respective owners, who may or may not be 
affiliated with, connected to, or sponsored by us.  

 

Printed on recycled paper.

 

 

Содержание DRM-BTD










Отзывы: