background image

78D0011

51

WDV Series Gas Fireplace

lIMIteD lIFetIMe Warranty pOlIcy

lIFetIMe Warranty

The following components are warranted for life to the original owner, subject to proof of purchase: Firebox, 

Combustion Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVe year Warranty

The following components are warranted five (5) years to the original owner, subject of proof of purchase: 

Ceramic Fiber Logs.

BasIc Warranty

Vermont Castings Group warrants the components and materials in your gas appliance to be free from 

manufacturing and material defects for a period of two years from date of installation. After installation, if 

any of the components manufactured by Vermont Castings Group in the appliance are found to be defec-

tive in materials or workmanship, Vermont Castings Group will, at its option, replace or repair the defective 

components at no charge to the original owner. Vermont Castings Group will also pay for reasonable labor 

costs incurred in replacing or repairing such components for a period of two years from date of installation. 

Any products presented for warranty repair must be accompanied by a dated proof of purchase.
This Limited Lifetime Warranty will be void if the appliance in not installed by a qualified installer in ac-

cordance with the installation instructions. The Limited Lifetime Warranty will also be void if the appliance 

is not operated and maintained according to the operating instructions supplied with the appliance, and 

does not extend to (1) firebox/burner assembly damage by accident, neglect, misuse, abuse, alterations, 

negligence of others, including the installation thereof by unqualified installers, (2) the costs of removal, 

reinstallation or transportation of defective parts on the appliance, or (3) incidental or consequential dam-

age. All service work must be performed by an authorized service representative.
This warranty is expressly in lieu of other warranties, express or implied, including the warranty of mer-

chantability of fitness for purpose and of all other obligations or liabilities. Vermont Castings Group does 

not assume for it any other obligations or liabilities in connection with sale or use of the appliance. It states 

that do not allow limitations on how long an implied warranty lasts, or do not allow exclusion of indirect 

damage, those limitations of exclusions may not apply to you. You may also have additional rights not 

covered in the Limited Lifetime Warranty.
Vermont Castings Group reserves the right to investigate any and all the claims against the Limited Life-

time Warranty and decide upon method of settlement.

IF Warranty serVIce Is neeDeD...

1.  Contact your supplier. Make sure you have your warranty, your sales receipt and the 

model/serial number of your Vermont Castings Group product.

2.  DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

Содержание WDV500NTSC





















































Отзывы: