20308184
35
VFF Vent Free Fireplace System
OPTIONAL ACCESSORIES
INSTALLING OPTIONAL FIREBRICK
PANELS
NOTE:
Firebrick liner kits may be used only with the VFF
vent free fi replace systems. Please verify the size and
model number of your insert to be certain the kit you pur-
chased is correct.
KIT CONTENTS:
• One (1) Center panel
• Two (2) self-drilling #8 screws
• One (1) Left panel
• Two (2) Brick retainer brackets
• One (1) Right panel
TOOLS REQUIRED:
Drill with 1/4" hex head or Phillips bit
INSTRUCTIONS:
1. Remove screen frame, stones, fi reglass or logs (if ap-
plicable) per the VFF Installation and Operating In-
structions.
2. Place rear ceramic fi rebrick panel against the center of
the rear wall of the fi rebox. Place on rear log support
bracket.
3. Place left and right ceramic fi rebrick panels against
fi rebox sides and attach at the top with retainer bracket
with supplied self drilling screws.
4. Replace fi reglass, stones and/or logs as applicable
and re-install screen frame.
Figure 57 -
Install Back Firebrick Panel
Figure 56 -
Install Side Firebrick Panel
Retainer
Brackets
