manualshive.com logo in svg

Vermont Castings SDDVTBDSB, Инструкция по установке и эксплуатации

Поделиться
Скачать
Vermont Castings SDDVTBDSB Скачать руководство пользователя страница 2

2

3-90-20306760

Vermont Castings • Stardance SDDVTSB Installation Manual_R10 • 04/18

PLEASE READ THE INSTALLATION & OPERATING INSTRUCTIONS BEFORE USING APPLIANCE.

Thank you and congratulations on your purchase of a Vermont Castings stove.

IMPORTANT:

  Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a 

possible fire hazard and will void the warranty.

Table of Contents

Operating Instructions

 .................................................. 31

Your First Fire .........................................................................31
Pilot and Burner Inspection .....................................................31
Flame & Temperature Adjustment ...........................................31
Flame Characteristics .............................................................31
Lighting and Operating Instructions ........................................32
Troubleshooting ......................................................................33
Read Before Lighting ..............................................................34

Signature Command Operating Instructions

 .............. 36

Features ..................................................................................36
Battery Installation ..................................................................36

System Configuration/Setup

 ...................................................36

Operating instructions

 .................................................. 38

Turning on the stove ...............................................................38
Command Center Operations .................................................38

Initialization and Setting up

 .....................................................39

Functions and Operations .......................................................40
Safety Features.......................................................................43

Troubleshooting

 ............................................................ 44

Troubleshooting – SIGNATURE COMMAND SYSTEM ..........44

Fuel Conversion

 ............................................................ 46

Cleaning & Maintenance

 ............................................... 51

Annual System Inspection ......................................................51

Logset and Burner / Cleaning and Inspection

 .........................51

Care of Cast Iron.....................................................................51
Cleaning the Glass..................................................................51
Gasket Replacement ..............................................................52
Inspect the Vent System Annually...........................................52
Check the Gas Flame Regularly .............................................52
Glass Replacement.................................................................52

Wiring Diagrams

 ............................................................ 53

Service Parts List

 .......................................................... 55

Optional Accessories

 .................................................... 59

Limited Lifetime Warranty

 ............................................ 60

Important Safety Information

 ......................................... 3

Massachusetts residents only ...................................................4

Pre-Installation

................................................................. 5

Stove Dimensions .....................................................................5
Installation Requirements .........................................................6
Clearance Requirements ..........................................................6
Parallel Installation ....................................................................7
Corner Installation .....................................................................7
Wall and Ceiling Clearances .....................................................7
Hearth Requirements  ...............................................................7

Gas Specifications

 ....................................................................8

Gas Inlet and Manifold Pressures .............................................8
High Elevations .........................................................................8

Horizontal Termination 

 .............................................................8

Vertical Termination ...................................................................9
Restrictor Plate Adjustment  for Extended Pipe Runs...............9
Vent Termination Clearances ..................................................10
General Venting Information – Termination Location .............. 11
Termination Clearances. .........................................................12

Assembly & Installation

 ................................................ 13

Venting Requirements and Options ........................................13
Assembling the Stove  ............................................................14
Install the Optional Fan – SDDVT Models 

(Millivolt Only) ������������

14

Venting System Assembly.......................................................16
Important Safety Information...................................................16
Before You Start ......................................................................16
Install the Vent Adapter Pipe ...................................................17
Assemble Slip Sections ..........................................................18
Secure the Vent Sections........................................................18
Disassemble Vent Sections ....................................................19

Horizontal Termination Cap

 .....................................................19

Divert Roof Run-off .................................................................20
Vertical Side Wall Installation ..................................................20
Vent Termination Below Grade ...............................................21

Vertical Through-The-Roof Application/installation

 .................22

Venting System Assembly - Natural Vent................................23
Install Log Set .........................................................................24

Install ON/OFF Switch – SDDVT Models 

(Millivolt Only)

 ........26

Thermostat Connection (optional)...........................................26
Signature Command® System (SC) .......................................26
Junction Box Wiring ................................................................27
Command Center Wall Installation .........................................27
Wall Switch Installation  ..........................................................27
Connect the Gas Supply Line .................................................28
Burner Information ..................................................................28
Signature Command Wiring Diagram .....................................29
Install the Safety Barrier..........................................................30
Install the Mesh and Grill ........................................................30

= Contains updated information

Содержание SDDVTBDSB

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды