7
RFSUV34 Vent-Free Heater
10001769
HS115
window frame
removal
12/02
Pull
Frame
Forward
Open
Clamps
HS115
Fig. 7
Open clamps and pull frame forward to remove.
Operating Instructions
Window Frame Removal
Refer to Figure 7.
1. Shut off gas. (See Lighting Instructions)
2. Let the unit cool if it has been operating.
3. Open two side doors.
4. Open the clamps on two sides.
5. Pull the frame forward.
6. To reinstall window frame follow the above proce-
dure in reverse.
As with all plastic - these are not toys and
should be kept away from children and infants.
Refer to Figure 8
3. Place rear log (KR10) on rear bracket (ensure log is
seated properly, leveled and centered to the unit), so
it will not move from side to side and is firmly posi-
tioned on the bracket.
4. Slip front ember log (KR7) down behind the front
deflector.
5. Place front left log (KR8) on top of burner, left side.
Use the log's bottom holes to locate it into the left
bracket log locator studs.
6. Place front right log (KR9) on top of burner, right
side. Use the log's bottom holes to locate it into the
right bracket log locator studs.
7. Place burner lava rock on top of burner. (Refer to
Burner Lava Rock Placement)
8. Place top left log (KR11) onto locator notches. En-
sure log is secure.
9. Place top right log (KR12) onto locator notches.
Ensure log is secure.
Burner Lava Rock Placement
Open the lava rock bag and place the contents accord-
ing to Figure 9. First place the small lava rock, then the
skinnier and long sticks.
No lava rock is to be placed on the rear section of the
burner.
�����
������������
����
KR11
KR10
KR8
KR12
KR7
KR9
LG436
Fig. 8
Correct log placement.
Log Installation
1. Remove window frame. (See "Window Frame" sec-
tion)
2. Remove logs from packaging.
