36
20306749
LX Series Direct Vent Gas Fireplace
OPERATING INSTRUCTIONS
OF
F
P
ILO
T
O
N
PILOT
FP1937
control knob on
MAIN BURNER SWITCH
The “ON/OFF/RS” switch for the main burner can be found behind door of the
fireplace. This switch allows you to turn on and to turn off the main burner without
using the gas valve knob. Make sure the button is in the “ON” position to light
the main burner.
Figure 51
LIGHTING THE BURNER
Depress and turn the knob counterclockwise
to the “ON” position.
Figure
52.
It will take less than four (4) seconds for the burner to ignite.
PILOT POSITION
Depress and turn knob to pilot position to keep burner off while maintaining the
pilot light.
Figure 53
Depress and turn knob clockwise
to “OFF” position.
Figure 54
TO TURN OFF GAS
Figure 53 -
Pilot Position
LIGHTING BURNER
PILOT
O
FF
PILOT
O
N
PILOT
O
FF
P
IL
O
T
ON
FP1935
control knob pilot
OFF
ON
RS
Figure 54 -
Off Position
W
ARNING
The control is fitted with a safety interlock
device which prevents unsafe ignition of the
pilot burner after the control knob has been
turned to the OFF position. The knob may
only be rotated back to the PILOT position
after the safety magnet has been released
(approximately 60 seconds). You will hear a
“click” when the safety magnet releases.
Figure 52 -
On Position
Figure 51 -
On/Off/RS Switch
