20306749
27
LX Series Direct Vent Gas Fireplace
FINAL INSTALLATION
LOG PLACEMENT
Before you begin
— This unit is supplied with eight
ceramic fiber logs. Do not handle these logs with your bare
hands.
Always wear gloves to prevent skin irritation
from ceramic fibers.
After handling the logs, wash your
hands gently with soap and water to remove any traces
of fibers.
INSTALL LOGS AND ROCK WOOL (EMBER
MATERIAL) IN FIREBOX
1. Carefully remove logs from wrapping.
2. Remove glass frame.
Refer to Glass Frame Removal,
Page 27
W
ARNING
The positioning of the logs is critical to
the safe and clean operation of this heater.
Excessive sooting and other problems may
result if the logs are not properly and firmly
positioned in the appliance. Never add
additional logs or embellishments such as
pine cones or vermiculite to the heater. Only
use the logs supplied with the unit.
Failure to position the parts in accordance
with diagrams below or to use only parts
specifically approved for this heater may
result in property damage or personal injury.
Lg805
LX rear right log
Bottom Right Log
#3
LG805
Figure 38
3. Place bottom right log (#3) on
two pins against right side of
firebox.
Figure 38
