Vermona DRM1 MKIII, Руководство пользователя

Страница: 22 / 24

Use as insert
The
OUT
jack
⑤
can also be used to insert external effect processors into that channel, such as
filters or delays. To do so, use a so-called insert-cable:
Figure 11: Insert cable
- Connect the TRS connector to the instrument channel’s
OUT
⑤
.
- Connect the send connector to the input of the effect processor.
- Connect the return connector (often color-coded in red) to the output of the effect processor.
Trigger-Inputs (optional)
You can purchase the DRM1 MKIII either with or without trigger-inputs.
The 10 trigger-inputs allow triggering the DRM1 MKIII’s sound from an analogue sequencer. The
unit will accept gate signals between 2 and 12 volts with a minimum length of 10 ms.
The analogue trigger-inputs do not respond to dynamic trigger signals. In this scenario, all sounds
of the DRM1 MKIII can only sound at a fixed volume.
The trigger inputs do not work with directly connected drum pads.
21 User Guide DRM1 MKIII
EN